N-(取代苯基)-2-(对氯苯氧乙酰基)氨基脲的合成与表征

以无机碱为催化剂，用不同的Ｎ－（聚代基）三氯乙酰胺与对氯苯氧乙酰肼反应，首次合成了３种新的取代氨基基脲化合物Ｎ－（取代苯基）－２－（对氯苯氧乙酰基）氨基脲，产率７１％以上。     

Nucleation of CO2-hydrate in a porous medium

Experiments designed to crystallize gas hydrate from dissolved CO₂ in natural porous media are used to study nucleation under varying thermodynamic conditions. We recover quantitative information from these experiments using a stochastic model for the nucleation process. Estimates of the model parameters are used to determine the average time for nucleation as a function of temperature and composition.     

Ytterbium triflate hydrate catalyzed Michael addition and cyclocondensation of α,β-unsaturated ketones with active methylene compounds

Catalyzed by ytterbium（III） triflate hydrate [Yb（OTf）3.xH20], the Michael addition and cyclocondensation of α,β-unsaturated ketones with active methylene compounds to afford the 1,4-adducts and benzo[b]pyran derivatives, respectively were studied.     

Linear expanded xanthines

Expansion of the xanthine ring system has been accomplished by linear formation of a benzo, pyrido or pyrazino ring between the pyrimidine and imidazole portions.

---

Linear expandierte Xanthine (Kurze Mitteilung)

Zusammenfassung Durch Einbau eines Benzo-, Pyrido- oder Pyrazino-Ringes zwischen den Pyrimidin- und Imidazoleinheiten wurde die lineare Expansion des Xanthin-Ringsystems erreicht.

     

Oxidative degradation of poly(isophthaloylhydrazine‐1,2‐diyl)s

The condensation polymerization of isophthalodihydrazide and diphenyl isophthalate affords poly(isophthaloylhydrazine‐1,2‐diyl). High‐molecular‐weight poly(5‐tert‐butylisophthaloylhydrazine‐1,2‐diyl) is prepared by the polycondensation of 5‐tert‐butylisophthalodihydrazide and bis(4‐nitrophenyl) 5‐tert‐butylisophthalate in NMP at 100 °C. T_d of the poly(diacylhydrazine) is observed above 300 °C. No T_g is observed below T_d. The high‐molecular‐weight poly(diacylhydrazine) exhibits a film‐forming ability. The poly(diacylhydrazine) decomposes on treatment with an oxidant such as sodium hypochlorite solution to obtain the corresponding carboxylic acid and nitrogen. However, poly(diacylhydrazine) was stable to oxygen and hydrogen peroxide even in the presence of transition metal ions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6255–6262, 2008     

A novel correlation for estimation of hydrate forming condition of natural gases

An inherent problem with natural gas production or transmission is the formation of gas hydrates, which can lead to safety hazards to production/ transportation systems and to substantial economic risks. Therefore, an understanding of conditions where hydrates form is necessary to overcome hydrate related issues. Over the years, several models requiring more complicated and longer computations have been proposed for the prediction of hydrate formation conditions of natural gases. For these reasons, it is essential to develop a reliable and simple-to-use method for oil and gas practitioners. The purpose of this study is to formulate a novel empirical correlation for rapid estimation of hydrate formation condition of sweet natural gases. The developed correlation holds for wide range of temperatures (265–298 K), pressures (1200 to 40000 kPa) and molecular weights (16−29). New proposed correlation shows consistently accurate results across proposed pressure, temperature and molecular weight ranges. This consistency could not be matched by any of the widely accepted existing correlations within the investigated range. For all conditions, new correlation showed average absolute deviation to be less than 0.2% and provided much better results than the widely accepted existing correlations.     

The hydrothermal decomposition of calcium monosulfoaluminate 14-hydrate to katoite hydrogarnet and β-anhydrite: An in-situ synchrotron X-ray diffraction study

We apply in-situ synchrotron X-ray diffraction to study the transformation of calcium monosulfoaluminate 14-hydrate Ca₄Al₂O₆(SO₄)·14H₂O [monosulfate-14] to hydrogarnet Ca₃Al₂(OH)₁₂ on the saturated water vapor pressure curve up to 250 °C. We use an aqueous slurry of synthetic ettringite Ca₆Al₂(SO₄)₃(OH)₁₂·26H₂O as the starting material; on heating, this decomposes at about 115 °C to form monosulfate-14 and bassanite CaSO₄·0.5H₂O. Above 170 °C monosulfate-14 diffraction peaks slowly diminish in intensity, perhaps as a result of loss of crystallinity and the formation of an X-ray amorphous meta-monosulfate. Hydrogarnet nucleates only at temperatures above 210 °C. Bassanite transforms to β-anhydrite (insoluble anhydrite) at about 230 °C and this transformation is accompanied by a second burst of hydrogarnet growth. The transformation pathway is more complex than previously thought. The mapping of the transformation pathway shows the value of rapid in-situ time-resolved synchrotron diffraction.     

Metal‐Free Aminosulfonylation of Aryldiazonium Tetrafluoroborates with DABCO⋅(SO2)2 and Hydrazines

The coupling of aryldiazonium tetrafluoroborates, DABCO?(SO₂)₂, and hydrazines under metal‐free conditions leads to the formation of aryl N‐aminosulfonamides. The reaction proceeds smoothly at room temperature and shows broad functional‐group tolerance. A radical process is proposed for this transformation.     

用静电自组装法制备的石墨烯薄膜特性研究

本文采用静电自组装技术制备石墨烯薄膜,以带正电的聚乙烯亚胺作为粘结剂,将带负电的氧化石墨烯自组装在粘结剂上,形成多层氧化石墨烯/聚乙烯亚胺复合膜,然后在肼蒸汽下还原得到石墨烯薄膜样品,并利用石墨烯薄膜的紫外吸收光谱、椭圆偏振光谱、扫描电镜图谱及拉曼光谱对其层数、厚度、形貌及还原效果进行了研究。研究表明此方法制备的石墨烯薄膜具有杂质含量少、层数与膜厚微观可控且膜厚均匀等优点。通过调节组装材料种类、浓度和组装次数可制备出结构和功能自由控制的石墨烯薄膜,且此方法与微电子工艺兼容,易于制作石墨烯晶体管,因此在石墨烯晶体管领域具有广阔的应用前景。     

Facile synthesis of calcium silicate hydrate using sodium dodecyl sulfate as a surfactant assisted by ultrasonic irradiation

Calcium silicate hydrate (CSH) consisting of nanosheets has been successfully synthesized assisted by a tip ultrasonic irradiation (UI) method using calcium nitrate (Ca(NO₃)·4H₂O), sodium silicate (Na₂SiO₃·9H₂O) and sodium dodecyl sulfate (SDS) in water. Systematic studies found that reaction time of ultrasonic irradiation and concentrations of surfactant (SDS) in the system were important factors to control the crystallite size and morphologies. The products were characterized by X-ray power diffraction (XRD), field emission scanning electron microscopy (FESEM) and Fourier transform infrared spectrometry (FTIR). The size–strain plot (SSP) method was used to study the individual contributions of crystallite sizes and lattice strain on the peak broadening of the CSH. These characterization techniques revealed the successful formation of a crystalline phase with an average crystallite size of about 13 nm and nanosheet morphology at a reaction time of 10 min UI with 0.2 g SDS in solvent which were found to be optimum time and concentrations of SDS for the synthesis of CSH powders.